Spiderweb group + Spider in web - Plain & Glitter versions, various sizes - DIY kit HTV Pre-Cut design. Ready to Apply HAL-220823031

This is a DIY item. Heat transfer professional quality vinyl for fabric. You can put this on any cotton or cotton blend, polyester garment. Place it in any position you want. Put it on the front or the back of the shirt or cut apart the pieces and rearrange how you want. This is just the design ready to apply it DOES NOT INCLUDE GARMENT.

Spiderweb group + Spider in web -Group of multiple size webs- as shown.
Sizes: Webs 4.8" W x 4" T (1), 6.6" W x 5.6" T (1), 5.6" W x 4.7" T (1), Web & Spider 8.2" W x 7.6" T (1),
Colors: Orange or Black - make your selection above
Material: Plain or Glitter - make your selection above.


Cut apart and use the pieces where you want. Put them on your shirts, bags, etc
Pick your color for the text from the drop down menu.
Our fabric vinyl has a very soft hand and is durable wash after wash.
Material/Fabric Compatibility
100% Cotton
100% Polyester
100% Preshrunk Cotton
Cotton/Poly Blends
Lycra®/Spandex Blends

This is a physical product and will be shipped to you.
All you need is a heat source to apply. An industrial heat press works best but it can also be applied with a home iron.
The garment should be clean with no fabric softener applied.

All HTV is cut & shipped out of Lake Havasu, Arizona.
If you select free shipping there will be no tracking available. If you would like tracking please select a shipping upgrade during checkout.


Application Steps:
Note: Use of an industrial heat press is best. There are several smaller craft versions that work well. A household iron will work but note that you will probably need to use more time, pressure or heat then listed below as irons have "holes" for the steam and this creates gaps in your heat and pressure application. Make sure you move the iron to different locations to compensate. A solid, smooth heat surface is best. Just remember this film uses a combination of heat AND pressure. When you use enough pressure the film will take on the characteristics of the fabric.

1. Set iron dial between cotton and linen 300-320 degrees is best. 330 for glitter.

2. Place your fabric item on a flat, hard surface. Iron or press it to get the wrinkles and moisture out of it.

3. Place the design face down on the fabric. Plastic carrier up. Cover with kraft paper or non-stick cover sheet or even a pillow case works. You can use the paper that is included with your design kit.

4. Press iron with medium/firm pressure. DO NOT use steam.

5. Press each section of design for 15 seconds if your heat source doesn't cover the entire design.

6. Rub over the carrier with a towel to help the design stick and to cool the surface. Peel carrier hot for glitter and warm for plain film.

7. If areas of the design lift when peeling the carrier off the design, replace cover sheet and re-press for 10-15 seconds using firm pressure. Make sure its not hot when trying to peel the carrier off (plain film)

Applies to: 100% Cotton, Poly/Cotton Blends, 100% Polyester, Leather.

THIS MAY NOT STICK IF FABRIC SOFTENER HAS BEEN APPLIED TO THE FABRIC.

Washing Instructions:
This is a very durable product and is rated to last 50 washes. I've washed garments in my regular wash and used the dryer on cool settings. I have designs that still look great with more than 50 washes.